Introducing the RVAM1 6.5″ Active Studio Monitor Speakers. If you thought you couldn’t get a pair of high-end, high-spec studio monitor speakers on a budget, we think you’ll be pleasantly surprised. With their distinctive red cones and sleek design, the RVAM1’s deliver a beautiful detailed, punchy sound helping you to get the very best from your mixes.
Each RVAM1 is bi-amped to ensure you get the very best sound. Top quality drivers and components have been used to give you a monitor speaker that is truly high-spec. Simply plug in your XLR or Jack cable into the combo socket and you’re ready to go.
Our RVAM1 studio monitor speakers work really well with our own range of microphones. Check them out!
Studio Monitor Speakers
Why studio and not general listening? Great question, and there’s a good reason. Most hi-fi speakers are built with a specific bias, often in the low-end. This can be great for general listening but not so good for mixing. Conversely, a good pair of studio monitor speakers will sound fairly neutral. That’s exactly what we’ve done with the RVAM1’s – they won’t flatter your sound. They’ll let you hear exactly what you need to hear in great detail, allowing you to get great mix. Get your mix sounding great on a pair of RVAM1 studio monitor speakers and you can rest assured you’re well on your way!
Check out the Dancetech Review of the RVAM1 Speakers
Check out our article where we answer the question “How are studio monitor speakers different from regular speakers?”
The RVAM1 Studio Monitor Speakers are ‘active’ meaning that you don’t need a separate amplifier. The amplifiers are already built-in and balanced perfectly to the speakers. You can connect to the RVAM1’s using either an XLR or JACK cable via in the in-built ‘combi’ socket. Simply plug them in, hook them up, switch them on and you’re good to go. Each speaker has it’s own master volume control.
High frequency Driver
1″ magnetically shielded ferrofluid-cooled natural soft dome
Low Frequency Driver
6.5″ magnetically shield mineral-filled polypropylene cone with high temperature voice coil and damped
Low frequency Amplifier
High Frequency Amplifier
Balanced or unbalanced source via an XLR or a 1/4″ Jack.
0.775V input produces full output with input level control at maximum
Power ON LED indicator
~220/240V ~ 50/60Hz
~100/120V ~ 50/60Hz
18mm MDF, Internally insulated
210mm X 255mm X 326mm