click to enlarge image
click to enlarge image
click to enlarge image

Technical Specifications of RVD9

Element: Moving Coil Dynamic
Polar Pattern: Cardioid
Frequency Response: 50Hz – 16kHz
Sensitivity: - 54dB (+/- 2dB) (0dB = 1V/Pa at 1kHz)
Output Impedance: 250. +/- 30% ( at 1kHz)
Max. Input SPL: 136dB ( at 1kHz 1% THD)
Net Weight: 320g

 


Technical Specifications of RVD1

Element: Moving Coil Dynamic
Polar Pattern: Cardioid
Frequency Response: 40Hz – 10kHz
Sensitivity: - 58dB (+/- 2dB) ( 0dB = 1V/Pa at 1kHz)
Output Impedance: 250. +/- 30% ( at 1kHz)
Net Weight: 490g

 

Technical Specifications of RV4

Element: Back Electret Condenser
Diaphragm: ½ inch diaphragm
Polar Pattern: Cardioid
Frequency Response: 50Hz – 18kHz
Sensitivity: -45dB (+/- 2dB) ( 0dB = 1V/Pa at 1kHz)
Output Impedance: 200. +/- 30% ( at 1kHz)
Max. Input SPL: 136dB (at 1kHz 1% THD) when phantom powered
S/N Ratio: 75dB ( IEC 268-5)
Phantom Power: 9-52V D.C. (2.0mA)
Battery Type: AA ( 1.5V).
Net Weight: 150g.

Accessories

Your Red5 Audio drum set comes bundled with
• Lockable flight case to provide maximum protection for your microphone
• Four adjustable drum mounts for the RVD9's.
• Foam windshield for the RV4's (not shown here) is also included.


Applications

The Red5 Audio drum set is obviously designed as a high quality set of microphones for recording a drum kit; however each of the individual microphones can also be used for a wide variety of applications. Some of the possible applications are:

RVD1
• Kick Drum
• Floor Toms
• Bass amplifiers

RVD9
• Snare Drum
• Toms
• Amplifiers
• Wind Instruments ( Brass etc.)
• Vocals

RV4 possible uses are endless…
• Acoustic instruments (acoustic guitar, piano, violin, etc.)
• Overheads (drums, ensembles, etc.)
• Wind Instruments (woodwind & brass)
• Percussion instruments
• Vocal (Solo or choir)

Features

RVD1 & RVD9's

• One RVD1 primarily intended for kick drum and four RVD9s primarily intended for snare drum and toms.
• Rugged construction comprising of solid zinc die-cast metal housing and hardened steel mesh grille.
• Cardioid polar patterns are used throughout the set to maximise the rejection of unwanted sound sources.
• Included with every set is four drum mounts to secure your microphones to the drums rims without the need for bulky microphone stands.
• Capable of handling very high sound pressure levels allowing for distortion free recording of even the lloudest source.
• High quality gold plated internal and external connectors. This prevents oxidisation of contacts, which can dramatically reduce the quality of your audio signal.

RV4's

• A small ½ in. diaphragm, coupled with a smooth, flat frequency response, accurately captures even the subtlest performance.
• Cardioid polar pattern allows for detailed capture of a specific source, while rejecting noise from surrounding sources.
• Option of being powered by a single internal AA battery. This allows for location recordings where phantom power is not available
• Capable of handling high sound pressure levels ( up to 136dB) allowing for an extremely wide variety of applications.
• External On / Off switch allows for conservation of battery life when recording 'on location’.
• High quality gold plated internal and external connectors. This prevents oxidisation of contacts, which can dramatically reduce the quality of your audio signal.