click to enlarge image
click to enlarge image

Technical Specifications of RVD9

Element: Moving Coil Dynamic
Polar Pattern: Cardioid
Frequency Response: 50Hz – 16kHz
Sensitivity: - 54dB (+/- 2dB) (0dB = 1V/Pa at 1kHz)
Output Impedance: 250. +/- 30% ( at 1kHz)
Max. Input SPL: 136dB ( at 1kHz 1% THD)
Net Weight: 320g

 


Technical Specifications of RVD1

Element: Moving Coil Dynamic
Polar Pattern: Cardioid
Frequency Response: 40Hz – 10kHz
Sensitivity: - 58dB (+/- 2dB) ( 0dB = 1V/Pa at 1kHz)
Output Impedance: 250. +/- 30% ( at 1kHz)
Net Weight: 490g

Technical Specifications of RV10

Element: Pressure Gradient Transducer
Diaphragm: 3-micron thick, dual vapour deposited gold diaphragms (1 Inch)
Polar Pattern: Cardioid, Figure 8 & Omni
-10 db Attenuation Switch
Low frequency roll-off switch
3-way Polar Pattern Switch at rear.
Internal and external gold-plated connectors
Frequency Response: 20Hz – 20kHz
Sensitivity: -31dB/-33dB/-34dB (+/- 2dB)
(0dB = 1V/Pa at 1kHz)
Output Impedance: 250Ohms +/- 30% (at 1kHz)
Self Noise: 14dBA
Max. Input SPL: 135dB (at 1kHz 1% THD)
145dB (with –10dB Pad)
Operating Voltage: 48V dc phantom power (+/- 5V)
Net Weight: 590g

Accessories

RVK5

  • Your Red5 Audio drum set comes bundled with
    • Lockable flight case to provide maximum protection for your microphone
    • Four adjustable drum mounts for the RVD9's.

RV10

  • Solidly constructed Shock-mount x2
  • Lockable aluminium flight-case x2
  • Foam windshield x2


Applications

The Red5 Audio drum set is obviously designed as a high quality set of microphones for recording a drum kit; however each of the individual microphones can also be used for a wide variety of applications. Some of the possible applications are:

RVD1
• Kick Drum
• Floor Toms
• Bass amplifiers

RVD9
• Snare Drum
• Toms
• Amplifiers
• Wind Instruments ( Brass etc.)
• Vocals

RV10
- Drum overhead

- Vocals
- Acustic instruments

Features

RVD1 & RVD9's

• One RVD1 primarily intended for kick drum and four RVD9s primarily intended for snare drum and toms.
• Rugged construction comprising of solid zinc die-cast metal housing and hardened steel mesh grille.
• Cardioid polar patterns are used throughout the set to maximise the rejection of unwanted sound sources.
• Included with every set is four drum mounts to secure your microphones to the drums rims without the need for bulky microphone stands.
• Capable of handling very high sound pressure levels allowing for distortion free recording of even the lloudest source.
• High quality gold plated internal and external connectors. This prevents oxidisation of contacts, which can dramatically reduce the quality of your audio signal.

RV10

With so much functionality and features packed into one microphone, this is the best performance in a large diaphragm mic that money can buy. You'll be astounded by its ability to faithfully reproduce the "original sound", particularly when recording vocals and acoustic instruments. It's multiple polar patterns offer a level of flexibility normally only found in microphones costing considerably more. Purchase one today and this will undoubtedly become one of your top recording assets . . .